1. Document requirements
1. No matter which software you use, please
design and make in CMYK mode. If use RGB, the color will change when converted
to CMYK printing. If not pantone color printing, please do not use pantone colors
for book printing artwork.
2. The picture resolution cannot be lower
than 300DPI, except for special circumstances;
3. After finalizing, please convert the
text and upload it again to avoid printing failure due to lack of fonts;
4. Please reserve 3mm of bleeding outside
the size of the printed product, and the page elements are more than 3mm away
from the finished product line;
5. For black text or lines, please use
monochrome black;
6. Please use C40K100 for large areas of
black to ensure that the black is saturated;
7. The line width cannot be less than
0.08mm;
8. The album files must have a clear order;
9. If there are processes such as spot
color, hot stamping, concave-convex, partial UV, die-cutting, etc., they must
be clear and can be separated.
2. Production requirements
1. Single page
The length and width of the design should
be 6mm larger than the finished product, so as to ensure the bleeding of 3mm on
each of the four sides of the finished product. The inner pages of the desk
calendar, posters, wall calendars, and folding pages are all done in the same
way
2. Folding
Different folding methods affect the width
of each fold, and the fold inside is narrower;
3. Picture album
When making a picture book, leave a
bleeding of 3mm each on the three outer edges of each page. Refer to the
picture book making diagram; the thickness of the spine of the plastic-bound
book and the lock-line plastic-bound book should be calculated. Refer to the
schematic diagram of making the cover of the album; the thickness of the
cardboard and the size of the pasted part should also be considered for the
cover of the hardcover album;
4. Cover
When designing the envelope, not only does
it require bleeding, but also considers whether or not to insert a business
card, and whether it will block the contents of the inside cover after it is
pasted;
5. Handbag
When the handbag is designed, the life
should stay on the front side of the handbag, and the interface will be on the
side of the handbag when the finished product is made. In addition, the
important content should be to open the hole for the rope.
6. Desk calendar
The design of the inner page of the desk
calendar is the same as the single page, except that important content cannot
be placed in the looping position; when designing the desk calendar base, the
position of the fold line and the inner core of the desk should be considered,
and important content should not be blocked.